WWII US Airborne Rigger Pouch (Standard Type Khaki) This is a brand new reproduction pouch made in house by us, this model follows the standard rigger design, and features a genuine Lift the DOT fastener for the flap closure, and is made to the correct size unlike some repro's currently available. Our latest version of this pouch is offer in our new khaki shade of canvas which we will be introducing this year. Please NOTE from this year these are now sold in single lots. £8.50    503rd P.I.R 5 x M1 Rifle/Carbine  (Riggers Field Made) This is our reproduction of the field made pouch pouches as produce by the parachute Riggers who were attached to element of the 503 Rd parachute infantry Regiment, these were made in the field using locally sourced materials including some made in white canvas , these pouches were of a very distinctive design, as the rifle clips or magazines are stored face to face instead of side to side, thus this reduces the width of the over all pouch however doe make it a little wider front to back. These pouches were normally used with an m1936 pistol belt and combat suspenders, most troop carry two. From research I’ve done these first appeared mid way through the war and were used right up until the end of hostilities. £20.00    503rd P.I.R 5 x 20Rd Thompson SMG (Riggers Field Made) This is our reproduction of the field made pouch pouches as produce by the parachute Riggers who were attached to element of the 503Rd parachute infantry Regiment, these were made in the field using locally sourced materials including some made in white canvas , these pouches were of a very distinctive design, as the rifle clips or magazines are stored face to face instead of side to side, thus this reduces the width of the over all pouch however doe make it a little wider front to back. These pouches were normally used with an m1936 pistol belt and combat suspenders, most troop carry two. From research I’ve done these first appeared mid way through the war and were used right up until the end of hostilities. £25.00    551st P.I.R 5 x M1 Rifle/Carbine (Riggers Field Made) This is our reproduction of the field made pouch pouches as produce by the parachute Riggers who were attached to element of the 551st, these were made in the field using locally sourced materials including some made in white canvas , these pouches were of a very distinctive design, as the rifle clips or magazines are stored face to face instead of side to side, thus this reduces the width of the over all pouch however doe make it a little wider front to back. These pouches were normally used with an m1936 pistol belt and combat suspenders, most troop carry two. These appear before the 503Rd type shown above, and thus these are in a lighter coloured fabric, I suspect that ether someone from the 503Rd sore these and then produced there version or was indeed transferred to area where the 551st were operating and got to here about the design that way, again these were used right up until the end of WWII. £20.00    551st P.I.R 5 x 20Rd Thompson SMG (Riggers Field Made) This is our reproduction of the field made pouch pouches as produce by the parachute Riggers who were attached to element of the 551st, these were made in the field using locally sourced materials including some made in white canvas , these pouches were of a very distinctive design, as the rifle clips or magazines are stored face to face instead of side to side, thus this reduces the width of the over all pouch however doe make it a little wider front to back. These pouches were normally used with an m1936 pistol belt and combat suspenders, most troop carry two. These appear before the 503Rd type shown above, and thus these are in a lighter coloured fabric, I suspect that ether someone from the 503Rd sore these and then produced there version or was indeed transferred to area where the 551st were operating and got to here about the design that way, again these were used right up until the end of WWII. £25.00    M1942 M1A1 Carbine Scabbard/Holster  (Standard Model) This is our reproduction of the standard jump scabbard or holster for the M1A1 carbine or the Paratrooper model as its sometimes known. This case is made form 14oz O.D#9 Canvas with Type I Class VIII binding and webbing, and a one inch leg strap made form Type III Class III heavy webbing all in a matching O.D#9 shade. This case is also cut to the original shape and lined with a felt pad as per the original., finally this is made with the correct weight thread and on the correct model of sewing machine. £35.00    M1942 M1A1 Carbine Scabbard/Holster (Riggers Field Modified) This is our reproduction of a riggers modified jump scabbard or holster for the M1A1 carbine or the Paratrooper model as its sometimes known, this particular configuration is based upon a original example which belongs to a American friend of mine. This case is made form 14oz O.D#9 Canvas with Type I Class VIII binding and webbing, and a one inch leg strap made form Type III Class III heavy webbing all in a O.D#3 (Light-Mid Olive) shade. This case is also cut to the original shape and lined with a felt pad as per the original, then is had had the additional section add to the top to take one of our repro M1 carbine pouches (*Carbine pouches now available separately) finally a two inch webbing section is add to take the pouch and an additional layer of padding is stitched into the front section of the scabbard. This item is made with the correct weight thread and on the correct model of sewing machine. £45.00 (Please Note Special Order Item Only 1-2 weeks Delivery Time)